When I built out my outdoor bar and coffee room, I ran into a common problem: not enough wall space. I needed a storage system that could hold shelves, knives, and cups without looking bulky or cluttered. That led me to a simple IKEA hack that came together beautifully.
The KUNGSFORS Rail System
IKEA’s KUNGSFORS is a modular kitchen wall system made up of vertical suspension rails, horizontal crossbars, and accessories you can mix and match. What sold me on it was the material — stainless steel. That means it holds up perfectly outdoors, which is exactly what I needed. It also has a clean, minimal look that fits a luxury outdoor space without feeling like an afterthought.
I installed two vertical suspension rails with 22-inch horizontal crossbars and added a magnetic knife bar across the top. One of the best features is that all the screws are hidden behind cover bars. If you want to reposition anything, you just slide the cover off, adjust, and snap it back. Super flexible.
The Custom Hook Hack
Here is where it gets creative. I wanted a dedicated bar for hanging my Moroccan espresso cups, so I bought a separate KUNGSFORS rail and a set of six magnetic clips from the same collection. The clips come with small built-in neodymium magnets, which is great, but the magnets alone were not strong enough for me to trust them long-term — even with lightweight cups.
I could not drill through the clips because the magnets inside are fragile and would crack. So I came up with a workaround. I positioned each clip at an angle so the cups would hang vertically, then bonded them permanently to the rail using J-B Weld epoxy.
The trick to getting a clean result is prep work. I laid down masking tape first to create straight guide lines. Then I cleaned both the clips and the rail with solvent before applying the epoxy. I wiped away any excess J-B Weld immediately so there would be no messy residue. Once cured, the bond is incredibly strong — and combined with the built-in magnets, those hooks are not going anywhere.
The Finished Look
With the main KUNGSFORS rail setup on one side and the custom cup bar right next to it, the whole wall has a cohesive, polished feel. Everything is stainless steel, everything matches, and it all works perfectly in an outdoor environment.
If you have been thinking of the KUNGSFORS system only for indoor kitchens or pantries, think bigger. It is an excellent solution for outdoor kitchens, bar areas, and coffee stations. Stainless steel plus a little creativity goes a long way.
Tools & Materials
IKEA KUNGSFORS parts used:
- KUNGSFORS Suspension rail, 31½”, stainless steel — 803.348.58
- KUNGSFORS Rail, 22″, stainless steel — 403.349.16
- KUNGSFORS Magnetic knife rack, 22″, stainless steel — 403.349.21
- KUNGSFORS Magnetic clip, stainless steel (set of 6) — 003.349.23
Other supplies:
- J-B Weld Original Cold-Weld Steel Reinforced Epoxy
- Masking tape
- Solvent for surface cleaning
- Basic mounting hardware (drill, screwdriver)
Watch the Build
Leave a Reply